H&R TRAK+ DRA Wheel Spacer - 25mm [5024571] – Euro Sport Accessories
Menu
Cart
H&R TRAK+ DRA Wheel Spacer - 25mm [5024571]

H&R TRAK+ DRA Wheel Spacer - 25mm [5024571]

SKU: 5024571

by: H&R

    • $14995


    DRA Series spacers bolt to the hub with special wheel bolts (included) and provide new threaded holes for the existing wheel bolts.

    Applications/Description
    Make Model Chassis Years Bolt
    Pattern
    Center
    Bore
    Bolt/
    Stud
    Thread
    Type
    Width Notes
    Volkswagen Cabriolet Golf I 1980-94 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Cabriolet Golf III 1995-03 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Corrado G60 1990-93 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Golf II 8V 1985-92 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Golf II 16V 1987-92 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Golf III 8V 1993-96 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Golf III 8V 1996-98 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Jetta I 1980-84 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Jetta II 8V 1985-92 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Jetta II 16V 1987-92 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Jetta III 8V 1993-96 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Jetta III 8V 1996-98 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Passat G60 Synchro 1989-94 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Rabbit 1980-84 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Scirocco I 1980-81 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Scirocco II 8V 1982-89 4/100 57.1 Bolt 12x1.5 25.0mm
    Volkswagen Scirocco II 16V 1986-89 4/100 57.1 Bolt 12x1.5 25.0mm

    HOW TO MEASURE

    1. Gather Tools

    To properly measure your wheel gap you will need a few simple tools:

    • Measuring device with millimeter units
    • Straight edge--Yard stick or similar

    2. Check Your Gap

    1. Place a straight edge flush with the face of the wheel and tire combination. Make sure the straight edge touches the tire in two spots to keep the straight edge even with the tire.
    2. Use the measuring device to measure from the inside of the straight edge to the inner fender lip. (see diagram)
    3. Make sure that the measurement is taken at the point where the wheel and tire is closest to the fender. For instance, on a car with a large amount of negative camber the tire and wheel may be closest at the front or rear edge of the fender.


    Other products in this Category

    #EUROSPORTACC - Tag us and get shown here!
    Sale

    Unavailable

    Sold Out