Euro Sport Camber Plates
SPC Camber Kit
SPC or 247 Camber Shims
H&R or SPC Camber Bolts
Euro Sport camber plates are for RACE USE ONLY. Installation of the camber plates requires cutting the elevated steel ridge on the front strut towers.
|
Euro Sport Race Camber Plates
Under extreme conditions, such as road racing, our camber plates are a must. Made from heavy-duty cad-plated steel to withstand the abuse of track use. The plates are designed to give 3-4° of additional camber. Our design also incorporates a 5/8" spherical bearing to replace the function of the OEM strut top bearing, once it has been removed for installation (Requires cutting and drilling top of the strut towers). Included are new alloy bolts, washers, locknuts and instructions. In order to take full advantage of our camber plates, it is recommended that coil-over suspension be utilized. Camber plates fit Mk1, Mk2, and Mk3 VW's. Each
camber plate and adjustment spacer sold separately.
Euro Sport Race Camber Plate - Mk1/Mk2/Mk3
Volkswagen All
For Race Applications ONLY, Body modification Required
|
18600K |
$109.95 Ea
 |
1/4" Aluminum Spacer for Euro Sport 18600K
Camber Plate |
18625 |
$15.95 Ea
|
SPC Mk4 Volkswagen/Audi TT Camber/Caster Kits
Now
it is possible to adjust the front camber on newer Volkswagens and Audi TT. This kit will provide a 1° positive or negative change for camber and/or caster. To install, simply remove the strut assembly, compress the spring and replace the O.E. upper bearing plate with this adjustable plate. One kit covers one side of the vehicle.
Combine the rear camber adjustment shims for a -.50° to -1.0° camber adjustment. A recommended installation tool is also available for ease of installation.
SPC Front Camber/Caster Kit - Audi TT 2WD (00-up) |
81340 |
$84.95 Ea
|
SPC Front Camber/Caster Kit - Mk4 VW (99-up) / R32 |
81340 |
$84.95 Ea
|
SPC +.5° Rear Camber Shim |
71530 |
$7.95 Ea
|
SPC +1° Rear Camber Shim |
71531 |
$7.95 Ea
|
SPC -.5° Rear Camber Shim - Audi TT 2WD (00-up) |
71532 |
$7.95 Ea
|
SPC -1° Rear Camber Shim - Audi
TT 2WD (00-up) |
71533 |
$7.95 Ea
|
SPC -.5° Rear Camber Shim - Mk4 VW (99-up) |
71532 |
$7.95 Ea
|
SPC -1° Rear Camber Shim - Mk4 VW (99-up) |
71533 |
$7.95 Ea
|
SPC Shim Wrench |
87530 |
$20.00 Ea
|
SPC EZ Cam™ XR Camber Adjusting Bolts
The new EZ Cam™ XR is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degrees (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.
|
H&R Camber Adjusting Bolts
Whenever you lower a vehicle's ride height, negative camber is increased-how much depends on the vehicle and the reduction in ride height. H&R's new Triple C camber adjusters are a simple, yet very effective means of removing excessive camber, adjusting your vehicle's camber settings, or even correcting small side-to-side camber variations for precise alignment.
Consisting of a pair of specially-designed bolts, H&R's patented Triple C camber adjusters replace the original upper fastening bolts on all McPherson strut applications. As the bolt is turned, a small cam eccentric alters the vehicle's camber, allowing adjustments from 0-3 degrees, positive or negative. Installation takes only minutes with readily-available hand tools, and benefits include increased tire life, improved tracking and the ability to dial in more camber for weekend track events.
Quite simply, H&R's Triple C camber adjusters are a great value. No other single suspension modification can yield such impressive results with such a small investment in time and money-and you can do it yourself. Sold by a pair.
 Click Here to view H&R application fitments.
|
| SPC Camber Bolts |
|
|
Mk1 VW R/J/S 79-88
Mk2 VW Corrado 90-94
Mk2 VW Passat 90-97
Mk2 / Mk3 VW G/J 85-98
|
81250 |
$25.95
|
| H&R Camber Bolts |
|
TC110 (A:10mm, B:36.0 - 48.0mm) |
$45.75
|
TC210 (A:10mm, B:45.5 - 48.0mm) |
$45.75
|
TC112 (A:12mm, B:40.0 - 48.5mm) |
$45.75
|
TC212 (A:12mm, B:30.0 - 39.0mm)
Fits:
Mk1 VW R/J/S 79-88
Mk2 VW Corrado 90-94
Mk2 VW Passat 90-97
Mk2 / Mk3 VW G/J 85-98
|
$45.75
|
TC114 (A:14mm, B:35.0 - 48.0mm)
Fits:
Audi 80/90 (Typ 89)
Audi B4 |
$45.75
|
TC115 (A:15mm, B:35.0 - 43.0mm)
|
$45.75
|
TC116 (A:16mm, B:41.5 - 48.0mm)
|
$45.75
|
TC117 (A:17mm, B:35.0 - 50.0mm)
|
$45.75
|
Mk1, Mk2, Mk3 Volkswagen Rear Camber Shims
Now offer your Mk1, Mk2 and Mk3 the same adjustability with these rear adjustment shims from 247-parts.com. Each shim is laser cut and precision machined from stainless steel for exact fit. Designed to fit between the rear stub axle and axle beam using existing bolts. Fits cars with or without ABS. Available in a -.50° or -1.0° camber adjustment. Each shim sold separately.
247-Parts -.5° Rear Camber Shim - Mk1, Mk2, and Mk3 VW |
ALIGSHM0.5 |
$35.00 Ea
|
247-Parts -.75° Rear Camber Shim - Mk1, Mk2, and Mk3 VW |
ALIGSHM0.75 |
$35.00 Ea
|
247-Parts -1° Rear Camber Shim - Mk1, Mk2, and Mk3 VW |
ALIGSHM01 |
$35.00 Ea
|
|
Checkout/View Cart
